MO 10 ROLL CRUSHER

DESCRIPTION

The Lab setup is used to crush different sample and material. Two heavy Smooth faced chilled metal rolls turning on parallel horizontal axes are the working elements of the roll crusher. A hopper is provided at the top for feeding the material. Particles of feed caught between the rolls arc broken in compression and drop out below. The rolls turn towards each other at the same speed. They have relatively narrow faces and are larger in diameter so that they can nip moderately large lumps. Loading bolts are provided for safety. The maximum size of the product is approximately equal to gap between the rolls & it can be adjusted by loading bolts.


RANGE OF EXPERIMENTS

  • • To determine the efficiency of the crusher for crushing a material of known working index


FEATURES

  • • Compact & stand alone set up
  • • Superb Painted structure
  • • Simple to operate & maintain


UTILITIES REQUIRED

  • • Feed Product
  • • Electricity: 2 kW, 220 Volts AC
  • • Set of sieves with sieve shaker for analysis


TECHNICAL SPECIFICATIONS

Product & Code Roll Crusher & MO 10
Rolls (2 Nos.) Material Chilled Steel , Dia 200mm, Width 100mm
Drive 3 HP Crompton motor coupled with 2.5" Centre
Height Reduction Gear Box to give 50-70 RPM
Feed Hopper Suitable capacity.
Max feed Size –Product 6 - 8 mm
Size 1 – 2 mm
Control Panel On /Off switch Main indicator etc

The set-up is fitted with required guards and product collection tray.

Painted rigid MS structure is provided to support all parts.

error: Content is protected !!