MO 16 CYCLONE SEPARATOR

DESCRIPTION

A Cyclone Separator is a vertical cylinder with the inlet stream introduced tangentially near the top giving the suspension a spinning rotation in the cylinder. The centrifugal force acting on the particles tends to throw them radially to the sides of the cylinder as they spiral downward to a conical bottom where they are removed. A collector is fitted at the bottom & the induced draft blower is used to create the air stream. The classified air leaves the cyclone through a pipe extended down into the cyclone & passes through blower delivery side fitted with fine screen cloth bag to avoid dust expansion in the laboratory. The setup consists of I.D. blower connected to discharge side of Cyclone Separator. Discharging silo is provided for solid mixing. A pitot tube with manometer is provided to measure the flow rate of air. Pressure drop in the Cyclone is measured by water manometer. Solids are collected in the collector fixed at the bottom.


RANGE OF EXPERIMENTS

  • • To study the performance of a given Cyclone
  • • To study the effect of inlet gas velocity on overall efficiency
  • • To study effect of solid concentration on ∆P (Pressure Difference)


FEATURES

  • • Stainless Steel tanks
  • • Superb Painted structure
  • • Simple to operate & maintain


UTILITIES REQUIRED

  • • Electricity supply 1 kW, 220 V, 1 Phase
  • • Floor Area 0.7 m x 2 m


TECHNICAL SPECIFICATIONS

Product & Code Cyclone Separator & MO 16
Cyclone Size dia 100mm
Solid Discharge Suitable capacity with discharge control valve.
Blower ID Fan Blower with 1 HP Crompton Motor
Air Flow Measurement Orifice with Manometer
Pr. Drop Measurement Manometer
Solids Collector Transparent PVC container fixed with Cyclone.
Fine Dust Collector Bag of Nylone cloth fixed on exit of air
Control Panel On / off switch, Mains Indicator & fuse etc

A good quality painted rigid MS Structure is provided to support all the parts.

error: Content is protected !!