MO 17 MAGNETIC SEPARATOR

Materials, that have different magnetic attract ability, may be separated by passing them through a magnetic field. Most often, magnetic separation techniques are used to remove iron, steel or magnetic iron oxide from materials low in magnetic attract ability. These devices operate in either a continuous or a cyclic manner. Continuous devices usually have a bell, which moves over the lifting magnetic poles to carry the magnetize partials into a region or low or zero magnetic field where they are released. The present set-up is or In-line lifting magnet type. The set-up consists or two belts moving separately in opposite direction at slow speed. Feed through a vibrating hopper is conveyed over first belt and allowed to pass near the second belt, which is under magnetic field. The magnetic field is generated by permanent magnet kept in a box. Magnetically inert material drops off the belt in a normal manner. Magnetic material is held on the belt however and finally drops of the belt as it leaves the magnetic field. Both the belts are fitted on the pulleys and drive by an electric motor coupled with a reduction gearbox. The set-up is complete with all accessories.

• • To study the Principles and operation of a Magnetic Separator
• To determine the efficiency of Magnetic Separator

• • Superb Painted structure
• • Compact & stand alone set up
• • Simple to operate & maintain

• • Feed Material
• • 1 kW, 1Ø supply
• • Weighing Balance