MO 23 RIBBON BLENDER

DESCRIPTION

A ribbon blender consists of a horizontal trough containing a central shaft and a helical ribbon agitator. Two counteracting ribbons are mounted on the same shaft, one moving the solid slowly in one direction, the other moving it quickly in other. The ribbons may be continuous or interrupted. Mixing results from the turbulence induced by the counteracting agitators, not from mere motion of solids through the trough. Some ribbon blender operates batch wise with the solids charged and mixed until satisfactory: others mix continuously, with solids fed in one end of the trough and discharged from the other. Ribbon Blenders are effective mixers for thin pastes or for powders that do not flow radially. The whole assembly is fitted on rigid MS structure. The trough is unloaded through an opening in the bottom. The setup studies in principles of mixing and can be operated as batch wise or continuously.


RANGE OF EXPERIMENTS

  • • To study the working of Ribbon mixer.


FEATURES

  • • Superb Painted structure
  • • Compact & stand alone set up
  • • Simple to operate & maintain


UTILITIES REQUIRED

  • • Electricity supply 1 kW, 220 V, 1 Phase.
  • • Floor area 1 m x 1.5 m


TECHNICAL SPECIFICATIONS

Product & Code Ribbon Blender & MO 23
Mixing trough Material SS , Size 600 x 300 x 380 mm (approx.) with semicircular bottom
Ribbon Material SS, Double helicoids type.
Cover for Trough Material Acrylic
Drive 1 HP Crompton motor coupled to Reduction Gear Box.
Collecting Bin 1 No. PVC
Control Panel On/off switches, mains indicator, starter etc.

A good quality painted rigid MS Structure is provided to support all the parts.

error: Content is protected !!