MO 25 POWER CONSUMPTION IN AGITATED VESSEL (Effectiveness of power consumption in fluid mixing)

For a processing vessel to be effective the volume of fluid circulated by the impellers must be sufficient to sweep out the entire vessel in a reasonable time. The velocity of the stream leaving the impeller must be sufficient to carry the current to the remotest parts of the tank. Liquids are most often mixed in some kind of tanks or vessels, usually cylindrical in form and with a vertical axis. Tank bottom is rounded to eliminate regions into which the fluid currents would not penetrate. In the present set-up mixing is done with the heir of stirrer. The stirrer is complete with SS Impeller with SS Shaft coupled to FHP DC motor with a reduction gearbox. The speed of agitator can be varied with the help Thyristor controlled DC Drive and power consumption is measured by Digital Voltmeter & Digital Ammeter. Four replaceable baffles are provided to prevent swirling. One 4-bladded propeller and one 6-bladded turbine are provided which are interchangeable. Drain valve is also provided at the bottom. Effectiveness of power consumption in fluid mixing can be performed with and without baffles hence increasing the range of experimentation. The whole set-up is mounted on a rigid MS frame structure.

• • To plot Power number Vs Reynolds number for the given set of impeller with baffled/unbaffled mixing.
• To study the mixing characteristics of given solid/liquid mixture.

• • Stainless Steel tanks
• • Superb Painted structure
• • Simple to operate & maintain

• • Electricity 1 kW, 220 V, 1 Phase
• • Water Supply & Drain