EP 04 ENGINE TEST SETUP 4 CYLINDER, 4 STROKE, PETROL

DESCRIPTION

 

The setup consists of four cylinder, four strokes, petrol engine connected to dynamometer for engine loading. The setup has stand-alone type independent panel box consisting of air box, fuel tank, manometer, fuel measuring unit. Engine jacket cooling water inlet, outlet and calorimeter temperature is displayed on temperature indicator. Flowmeters are provided for cooling water and calorimeter flow measurement. Provision is also made for conducting Morse test.

 

RANGE OF EXPERIMENTS

 

  • Study  of  engine  performance  for  power, efficiencies, fuel consumption, air fuel ratio and heat balance
  • Morse test

 

UTILITIES REQUIRED

 

  • Electric supply Provide 230 +/- 10 VAC, 50 Hz, single phase
  • Water supply: Continuous clean and soft water @4000 LPH, Head 10 m.(min
  • Drain: Provide drainpipe 2½” NB size.
  • Exhaust: Provide exhaust pipe 1½” NB size.
  • Fuel, oil: Petrol: @ 10 liter, Lub. oil: @ 5 liter (20W40)

 

TECHNICAL SPECIFICATIONS

Product & Code Engine test setup 1 cylinder, 4 stroke, petrol & EP 02
Engine Make- Honda/Greaves, side valve horizontal shaft, Type-Single cylinder, 4 stroke Petrol, Air cooled, BHP 3.1 at 3600 rpm, Stroke 56 mm, Bore 67 mm, Capacity 197cc, Compression ratio 4.5 : 1, Max. Torque 0.8 kgm / 2500 rpm (approx), with Carburetor & silencer standard. assembly
Dynamometer Type rope brake, (Model EP 02 R)
Type Electrical with loading device (Model EP 02 E)
Special electrical dynamometer with electric start facility for engine & motoring test (Model EP 02E S)
Eddy current dynamometer with loading unit(Model EP 02 ED)
Air box M S fabricated with orifice meter and manometer
Fuel tank Capacity 5 lit
error: Content is protected !!